LABORATORY EXPERIMENT 21 | P a g e Dr. Nabila ShamimCHEG 3301_P02Chemical Engineering Laboratory 1Shell and Tube Heat

LABORATORY EXPERIMENT 2

1 | P a g e
Dr. Nabila Shamim

CHEG 3301_P02

Chemical Engineering Laboratory 1

Shell and Tube Heat Exchanger

Submitted to

Dr. Nabila Shamim

LABORATORY EXPERIMENT 2

2 | P a g e
Dr. Nabila Shamim

Heat exchangers are used in industries to transfer heat between two fluids. There are

multiple types of heat exchangers. A shell-tube exchanger is the exchanger most commonly used

by industries. It is where multiple inner tubes are surrounded by one outer tube. In the

experiment, a shell and tube heat exchanger will be used. The figure below shows an example of

the type of heat exchanger used during the experiment.

Figure 1: A schematic diagram of Shell and Tube heat exchanger

Figure 2: A schematic diagram of the heat exchanger

LABORATORY EXPERIMENT 2

3 | P a g e
Dr. Nabila Shamim

1. Determine and record the following quantities, based on the system

a. Number of tubes

b. Number of passes

c. Number of baffles

d. Number of shell passes

2. Reference Information for Shell and Tube Heat Exchanger

a. Tube length: L =

b. Tube type:

c. Tube dia. outer, Do =

d. Tube dia. inner, Di =

e. Tube material:

f. Number of tube passes, Np =

g. Number of tubes per pass, Nt =

h. Baffle spacing: B =

i. Shell width: Ws =

j. Shell height:

k. Baffle window height: hbw =

3. Understanding Flow Paths and Measuring Heat Transfer Rate/Heat Duty

Results and Discussion

4. Raw data for all Experiments

a. Keep cold fluid flow rate constant vary hot fluid flow rate two times

b. Keep hot fluid flow rate constant vary cold fluid flow rate two times

Table 1. Experimental data.

Expt. #

Tube Side (Hot) Shell Side (Cold)

(C) (C) V

(mL/min)

(C) (C) V

(mL/min)

1

2

LABORATORY EXPERIMENT 2

4 | P a g e
Dr. Nabila Shamim

Experimental Heat Duty

5. Calculate the rate of heat rejection for the hot fluid ( ) and the rate at which the cold

fluid receives heat ( )

6. Compare the heat rejection rate of the hot fluid for Experiments a and b of section 4.

Which is highest and why?

Determining the Predicted Heat Transfer Rate

7. We can calculate theoretical overall heat transfer rate using a correlated heat transfer

coefficient (Uo), the area available for heat transfer ( , the log mean temperature

difference ( , and a correction factor (F).

a. Calculate the log mean temperature difference.

b. Calculate the tube side heat transfer coefficients for your experimental conditions.

The tube side heat transfer coefficient can be found using the Sieder-Tate

correlation for the Nusselt number (neglecting viscosity differences between the

fluid at the wall and the bulk fluid):

Expt. #

Tube Side

1

2

c. Calculate the shell side heat transfer coefficients for your experimental

conditions.

where:

The weighted average mass velocity, defined below, is used in the shell side

Reynolds number:

LABORATORY EXPERIMENT 2

5 | P a g e
Dr. Nabila Shamim

Expt. #

Shell Side

1

2

d. Calculate the theoretical overall heat transfer coefficients for each experiment

e. Calculate the predicted heat transfer rate

8. Compare the predicted heat transfer rate to the measured heat transfer rate for each

experiment. If the values do not agree, list some possible reasons.

LABORATORY EXPERIMENT 2

6 | P a g e
Dr. Nabila Shamim

Report Writing

Abstract 5 Points

Introduction 5 Points

Theory 10 Points

Equation of Heat Exchanger

A schematic diagram of heat exchanger

Experimental Procedure 20 Points

Description of the experimental procedure

(Section 1 to 3)

Results 40 Points

(Section 4 to 6)

Discussion 7 Points

(Section 7)

Conclusion 5 Points

References 3 Points

Share This Post

Email
WhatsApp
Facebook
Twitter
LinkedIn
Pinterest
Reddit

Order a Similar Paper and get 15% Discount on your First Order

Related Questions

Imagine that you are involved with a hazardous material spill

Imagine that you are involved with a hazardous material spill response or cleanup operation. Describe a cleanup or response plan that you might put into place, and describe what you believe would be your role in it.ALSO PLEASE REPLY TO ANOTHER STUDENTS COMMENT BELOW  EMMANUEL: An effective spill response procedure

1 Download and open the file named exploring_e06_grader_Capstone2.xlsx. Rename it

      1    Download and open the file named exploring_e06_grader_Capstone2.xlsx.Rename it LastNameFirst_Assignment5__   ValentineBudget.xlsx   2 Use   Goal Seek to achieve a $0   balance by changing the Ticket Price per Person.    Hint: -Use of the correct cells in Goal Seek dialog box  -Apply Goal Seek correctly  -Correct solution     3 Beginning   in cell

Outline for a health promotion

Develop an outline for a health promotion program to meet the identified community diagnosis (include goals and objectives). Provide the rationale for the identified need, goals, and objectives for the program. Hint: Consider using a program logic model format (as an appendix) to present the data. Incorporate health promotion approaches (Table 18.1, p.262

Unit Outcomes: Identify the difference between projects, programs, and operations.

  Unit Outcomes: Identify the difference between projects, programs, and operations. Identify project management process groups and knowledge areas. Examine common project management processes and their interactions. Course Outcome: Analyze the Project Management Framework to identify relationships between process groups and knowledge management areas. Purpose This assignment calls for you

Response Requirements: 1) Research and write about food deserts in

Response Requirements: 1) Research and write about food deserts in the United States. Which communities are most impacted by food deserts? What areas in the United States are most impacted by food deserts? What are proposed or possible solutions to the damage caused by food deserts? Summarize your findings in

Q.1. Explain the differences among various concepts of yield such

   Q.1. Explain the differences among various concepts of yield such as yield to maturity, yield to call, and anticipated realized yield. ( 2 Marks) Q.2. Explain the effect that duration has on bond price sensitivity to interest rate changes and relate zero-coupon bonds to the concept of duration.  (

Topic Management Development and Strategy (refer textbook) 500 words on

Topic   Management Development and Strategy (refer textbook) 500 words on each topic following the below format. Please add at least 1 reference a: Overview describing the importance of the research topic to current business and professional practice in your own words. b:Purpose of Research should reflect  the potential benefit of

Please answer the following two questions. Please use the attached

Please answer the following two questions. Please use the attached readings as references. Please cite in APA format. Question 1:  IN YOUR OWN WORDS, explain the advantages and disadvantages of using home country nationals. In which situation would you use this staffing strategy? Question 2: What three skills do you

Hacking

Description Starting in the spring of 2014, eBay was subjected to a series of security intrusions into its database of user passwords. The breach occurred when hackers compromised some employee login credentials, giving them access to the eBay system. It took over two months for eBay to know it had

Discussion Topic Directions: First, go to the Young Child Risk

 Discussion Topic Directions: First, go to the Young Child Risk Calculator at the National Center for Children in Poverty by this link (http://www.nccp.org/tools/risk/). Complete the Calculator for your particular state, choosing an age range, income level, and one or more risk factors. Take note of your results (you can even

Purpose  This assignment is intended to help you learn how to

Purpose  This assignment is intended to help you learn how to apply statistical methods when analyzing operational data, evaluating the performance of current marketing strategies, and recommending actionable business decisions. This is an opportunity to build critical-thinking and problem-solving skills within the context of data analysis and interpretation. You’ll gain

Assignment: Research and report on the advocacy process for one

  Assignment: Research and report on the advocacy process for one health policy issue at your state level. Detail the steps taken to move this issue forward legislatively. Examine the collaboration of interest groups and stakeholders in this process. What were the barriers? Where is this policy issue now? Is

Compare and contrast– Two different tribes of Indigenous people in

Compare and contrast– Two different tribes of Indigenous people in their connection and spiritual beliefs to corn.    •Indicate geographic/historic location of Tribe A. Briefly summarize the oral tradition, pertaining to corn, of Tribe A. Compare and relate it to a second oral tradition that you picked, pertaining to corn, of Tribe

Goal: Develop a clinical practice question using PICO(T) that focuses

  Goal: Develop a clinical practice question using PICO(T) that focuses on a clinical issue to improve the quality of care. Requirements: 1. As a team, you will identify a clinical problem/opportunity, draft a PICOT question.2. Review the literature (using the articles you are reading for your weekly summaries, if

Peer Reviewed Journal sources.

Discussion Reply: Outside Research/Peer Reviewed Journal sources. Just as you did with your main post!) Make sure you reflect on the question before posting to our discussion board. Also, make sure your posts integrate material from the textbook and other sources used. Also, posts must be germane to the topic,